N type features: Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, clamp/solder (captive contact), crimp/solder, field replaceable, solder or solder/solder; Body is brass or stainless steel.
1.0-2.3 Connector Features: Can terminate to coax or PCB (printed circuit board); Can be jack or plug gender in standard polarity with 50 or 75 ohm impedance; Body can be straight or right angle; Mount Method can be bulkhead or mount-less; Attachment methods include crimp/solder, solder or solder/solder; Body is brass or stainless steel.
Features: Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.
1.0-2.3 Cable assembly Features: Can be combined with 1.0-2.3, or BNC connector; Broadband performance with low reflection; Quick connect/disconnect snap-on mating reduces installation time; Body is straight with male genders.
UHF Connector Features: Can terminate to coax or terminal; Can be male, female or sexless gender with 50ohm impedance; Body can be straight or right angle; Mount Method can be 4 hole flange, bulkhead, 4 hole panel or mountless options; Attachment methods include clamp/solder, crimp/solder, field replaceable or solder; Body is brass or zinc.
TNC Cable assembly Features: Can be combined with BNC, FAKRA, MCX, MMCX, N, SMA, SMB or TNC connector; Body Can be right angle or straight connectors; Max Frequency 18 GHz; Cable Can use flexible, formable or semirigid cable.
BNC Connector Features: Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be 4 hole flange, bulkhead, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder, field replaceable, solder or solder/solder; Body is brass with nickel or gold or silver or tri-metal plating.
4.3-10 adapters Features: Allow to interface 4.3-10 connectors with N, 7-16 DIN, 4.3-10 or SMA connectors; Same design as 7-16 connectors , smaller up to 40% lighter; Designs IP67, and provide excellent VSWR performance up to 6GHz; Very stable PIM performance, allowing for easier installation; Silver plated contacts and White Bronze plated bodies offer a high-degree of conductivity, corrosion resistance, and durability; Applications low passive intermodulation or PIM.