RF connectors used in communications, medical, aerospace and other fields are not just RF connectors, they are also used with cable assemblies to complete a signal bridge. Generally, the RF connector has two forms of use: one is directly mounted on the instrument panel or the printed circuit board, and the other is a structure in which the RF coaxial cable is conn...
What are the main parts of the RF connector? Where is the application? Now introduce the relevant structural knowledge about RF connectors. The main components of the RF coaxial connector are outer conductor, insulator, center pin, nut case, buckle, waterproof ring, dust cap, etc. First, the outer conductor acts as a grounding shield. The materi...
With the rapid growth of consumer electronics, automotive electronics, communication terminal market and the continuous transfer of SMP Connector production to Asia especially China, Asia has become the most promising place in the SMP connector market, and China will become the global growth of SMP RF connector. Fast and large capacity markets. It is estimated that the growth rate of...
A typical VSWR for a low-cost 3 GHz test cable and when used at higher frequencies requires a microwave test RF cable assembly, which means that the user has to pay a higher cost. This is because the design and manufacturing philosophy of microwave cables is different from that of conventional cables. For example, microwave cables usually use multiple layers of sh...
In a variety of RF coaxial connectors are chosen to have different coatings, why should it be plated? What factors should be considered for plating? What is the plating material? This pile of questions, is not very Mongolian! Today summarized the materials and problems of the RF coaxial connector selection coating. Let's take a look! In the electrical and electronic ind...
Due to the increasing variety of RF coaxial connectors, new structures and applications are emerging, and attempts to solve classification and naming problems with a fixed pattern have become difficult to adapt. The following is a list of some RF coaxial connectors sorted out . 1, according to the nature of use External connector (for external chassis...
When the RF connector has a signal interference problem or cannot pass the test. The following five points of solution are summarized for your reference. 1) Although the chassis or cabinet is well shielded, the radiated emissions are too high or cannot pass the radiated immunity test. This is because the outer tow cable on the chassis or cabinet acts as an RF antenna. O...
The board to board RF connector is a very common connector product. Among all the connector product types, the board to board RF connector has the strongest transmission capability, mainly used in communication networks, power systems, and industrial applications. Automation, medical equipment, office equipment, smart appliances, military manufacturing and other industries....