In the process of transmitting data signals, the Coaxial cable will continuously wear out the signal, which will cause the amplitude of the signal to decrease after reaching the end point, and sometimes it will not meet the normal working requirements. The factors affecting signal loss mainly include cable resistance loss, dielectric loss, and mismatch loss. At the same tim...
Coaxial cable can be divided into baseband coaxial cables and broadband coaxial cables from the main purpose. Coaxial cable is divided into two categories: 50Ω baseband cable and 75Ω broadband cable. The baseband cable is divided into a thin coaxial cable and a thick coaxial cable. The baseband cable is only used for digital transmission with a data rate of up to 10Mbps. ...
SYV75-3, 5, 7, 9 ..., 75 ohm, polyethylene insulated solid coaxial cable. In recent years, some people call it "video cable", SYWV75-3, 5, 7, 9 ... 75 ohm, physical foamed polyethylene insulated coaxial cable. Some people call it "RF cable", It can be connected to RF connectors. The basic performance of coaxial cable: (1) SYV physical structure is 100% pol...
With the rapid development of wireless communication technology, the application of Board-to-Board RF Connectors in the wireless system module Internet is becoming more and more popular, such as communication base stations, RRHs, repeaters, GPS devices and other similar applications. After several generations of evolution, Board-to-Board RF connectors are moving from l...
N-type connector is a threaded medium power connector with high reliability, strong shock resistance, excellent mechanical and electrical performance, widely used in radio equipment and instruments and ground launch systems under harsh vibration and environmental conditions. Connect the RF coaxial cable. Can be interchanged with international N-type products. According to the charact...
The RF coaxial connector is a functional component that relies on electrical signals or mechanical forces to connect, disconnect, or switch circuits. It transmits data electrical signals or electron energy. Thus, RF connectors can be found in locations where electronic systems exist. In large and medium-sized electronic systems, hundreds of RF coaxial connectors are required. It...
The N-type connector is suitable for frequency range from 0 to 11 GHz. Which it is used for medium and small power coaxial cable connectors with threaded connection. It is the most widely used connector in indoor distribution and has good mechanical properties. Most feeders are used. The N-type connector is a small and medium power connector with a t...
The BNC connector is a very common RF terminal coaxial cable terminator. It consists of a center pin, a jacket and a card holder. It consists of a base, a jacket and a probe. The BNC connector is very similar to the B and C terminals. A threaded connector TNC (Threaded Neill-Concelman) has better performance in the microwave band than BNC. &n...
