With the rapid advancement of science, the threaded waterproof connectors SMA, which are the most widely used and are also widely used in outdoor. SMA waterproof connectors mean that connector can be used when there is water. A connector that can withstand the mechanical properties of the connector and the electrical performance of the con...
The BNC connector is a very common RF terminal coaxial cable terminator. It consists of a center pin, a jacket and a card holder. It consists of a base, a jacket and a probe. The BNC connector is very similar to the B and C terminals. A threaded connector TNC (Threaded Neill-Concelman) has better performance in the microwave band than BNC. &n...
The N-type connector is suitable for frequency range from 0 to 11 GHz. Which it is used for medium and small power coaxial cable connectors with threaded connection. It is the most widely used connector in indoor distribution and has good mechanical properties. Most feeders are used. The N-type connector is a small and medium power connector with a t...
The high frequency connector is a precision connector for testing and measurement, with high sensitivity, low loss, and phase stability for high frequency microwave applications at 67 GHz. They are made of high-grade materials for longer life and greater durability. Due to its high mechanical stability and thread design, the high frequency connector provides the best electrical ...
SMA connectors are a widely used half-precision ultra-small RF and microwave connector, especially for RF connections in electronic systems with frequencies up to 18 GHz or higher. At present, more and more scenes need SMA connectors, which made by the body, the center pin, an insulator with a waterproof outer. So any other will use SMA connector? ...
The development of RF connectors should be miniaturized, high-density, high-speed transmission, and high-frequency development. Miniaturization means that the center of the connector is smaller, and the high density is to achieve large core number. High-density PCB (printed circuit board) connectors have a total of 600 core contacts and up to 5000 cores for dedicated devices. Future ...
In addition to the evolution of the RF coaxial connector itself, the evolution of new mobile network in the RF system of all communication systems has also changed. Overview the future development of mobile communication protocols, channel bandwidth continues to increase, 200KHz in the 2G era, 5MHz in the 3G era, 100MHz in the 4G era, will reach 1GHz in t...
The RF coaxial connector is a functional component that relies on electrical signals or mechanical forces to connect, disconnect, or switch circuits. It transmits data electrical signals or electron energy. Thus, RF connectors can be found in locations where electronic systems exist. In large and medium-sized electronic systems, hundreds of RF coaxial connectors are required. It...
N-type connector is a threaded medium power connector with high reliability, strong shock resistance, excellent mechanical and electrical performance, widely used in radio equipment and instruments and ground launch systems under harsh vibration and environmental conditions. Connect the RF coaxial cable. Can be interchanged with international N-type products. According to the charact...
