Combined Antennas

Combined Antenna Outdoor GPS Wifi 4G LTE Combo Antenna Omni Directional Waterproof Screw Mount 3-in-1

Features:

  • Radiation Pattern of Antenna;
  • Polarization of Antenna;
  • Intensity of Radiation;
  • Effective Aperture;
  • Gain & Directivity;
  • Bandwidth;
  • Power Gain & Radiation Efficiency;
  • Effective Length;
  • Input Impedance.
  • Brand:

    ROHO
  • Product Origin:

    China
  • Shipping Port:

    Shenzhen
  • Lead Time:

    7-17days

Combined Antenna Outdoor GPS Wifi 4G LTE Combo Antenna Omni Directional Waterproof Screw Mount 3-in-1 

The Antenna, also called Aerial, component of radio, television, and radar systems that directs incoming and outgoing radio waves. Antennas are usually metal and have a wide variety of configurations, from the mastlike devices employed for radio and television broadcasting to the large parabolic reflectors used to receive satellite signals and the radio waves generated by distant astronomical objects.

 

Specifications

ELECTRICAL DATA  
Frequency Range(MHz)  4G
VSWR  ≤1.5
Gain(dBi)   3-42dBi
Input Impedance(Ω)  50
Cable Type  RG174
Connector Type  SMA Male
Mounting  Magnetic
Housing  Black/White
Storage Temperature  -45'c to +75'c
Operating Temperature  -45'c  to+75'c

 

Applications

  • Antenna Gain
  • Aperture
  • Directivity and bandwidth
  • Polarization
  • Effective length
  • Polar diagram

 

Leave A Message
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!
Categories
Related Products
MCX Jack PCB Solder Connector
MCX Jack Female Connector Straight Solder Attachment Surface Mount for PCB
MCX Connector Features: Can terminate to coax, PCB (printed circuit board) or terminal; Can be jack or plug gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include crimp/solder or solder; Body is brass or stainless steel.
UFL IPEX MHF Male Female RF Connector
IPEX4 MHF4 UHF4 Male Plug Connector IPEX4 MHF4 UHF4 Female Jack Wifi Antenna Connector for RF 0.81mm Cable
Features: Nominal mated height of 1.9 or 2.4mm (Max. 2.0 or 2.5mm ) ; Accepts high frequency transmission; Small mounting area The receptacle occupies an area of 7.7mm; Light weight; Plugs are terminated with ultra-fine coaxial (fluorinated resin insulated )cable; Automatic board placement; Simple connector mating / unmating; Verification of the fully mated condition.
50W N Female Dummy Load
50W N Female Jack Connector Coaxial Dummy Load DC-3GHz RF Dummy Load 50ohm Terminator
Features: High Peak Power; Low VSWR; Multiple IP Degree Conditions; Powers 2W to 500W; Low PIM Performance; N,DIN, 4.3-10 Connectors; Low Cost Design, Design to Cost.
N Male to N Female LMR400 Cable Assembly
N Male to N Female Bulkhead with LMR400 Coaxial Cable Assembly
N Type Cable assembly Features: Can be combined with 2.2-5, 4.3-10, 7-16 DIN, BNC, F, MCX, MMCX, N, NEX10, QMA, QN, SMA, SMB, SMP, TNC or UHF connector; Body Can be 4 hole panel, bulkhead or standard mount connectors; Body Can be right angle or straight connectors; Cable Can use corrugated, flexible, formable or semirigid cable.
SMA Female Solder RF Coaxial Connector
SMA Female Straight Connector Solder Attachment Surface Mount for PCB
SMA Connector Features: Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.
SMP Male Coaxial Connector
SMP Male Hexagon Body Connector Solder Attachment Thread-In Mount with Pin
SMP Connector Features: Can terminate to coax, PCB (printed circuit board), shroud or terminal; Can be male or female gender with 50ohm impedance; Body can be straight or right angle; Mount Method can be bulkhead, 2 hole panel or mount-less; Attachment methods include solder, crimp/solder, or solder/solder; Body is brass or stainless steel.
5W BNC Male Termination Dummy Load
5W BNC Male Termination Load DC-3GHz RF Coaxial Dummy Load Termination Power
 Features: Low VSWR & Low Attenuation ; 3G/4G/5G LTE Coverage; Indoor & Outddoor applicationn; Wide Frequency Band ; Widely used for in-building Soloution; All Sepcifications can be changed as you enquirements.
100W UHF Male Termination Dummy Load
100W PL259 Male Plug 50ohm DC-1GHz RF UHF Termination Loads Dummy Load Connector for IBS DAS
Featrues: Wide Frequency Band Covering 555-4000MHz; Excellent Performance in PIM; Low VSWR; Indoor& Outdoor Using IP65; Available with Type N, DIN7-16, 4.3-10, NEX10 Connectors.
Any question? Contact us now !

Leave A Message

Leave A Message
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

Home

Products

skype

whatsapp