NEX10 features： Can terminate to coaxial; Can be male or female gender in standard polarity, with 50ohm impedance; Body can be straight or right angle; Mount Method can be bulkhead or mount-less; Attachment methods include clamp/solder, crimp/solder or solder/solder.
7-16 DIN adapters Features： Allow to interface 7-16 DIN connectors with 7-16 DIN, 4.3-10, N, SMA or TNC connectors; Very robust, extremely stable and waterproof; Has straight or right angle versions; Offers standard, low PIM or high performance options.
BNC Cable assembly Features： Can be combined with 1.0-2.3, 7-16 DIN, BMA, BNC, F, FAKRA, MCX, N, SMA, SMB, Straight Cut Lead, TNC, or UHF connector; Body Can be bulkhead or standard mount connectors; Body Can be right angle or straight connectors; Cable Can use flexible, formable or semirigid cable.
4.3-10 Cable assembly Features： Can be combined with 2.2-5, 4.3-10, 7-16 DIN, N, NEX10, QMA, or SMA connector; Body Can be right angle or straight connectors; Body Can be 4 hole panel, bulkhead or standard mount connectors; Cable Can use flexible or corrugated cable.
SMA Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.
Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.
SMA Cable assembly Features： Can be combined with 1.85mm, 2.4mm, 2.92mm, 3.5mm, 4.3-10, 7-16 DIN, BNC, FAKRA, MCX, MMCX, N, NEX10, QMA, QN, SMA, SMB, SMP, TNC, Trimmed Lead or U.FL connectors; Body Can be 2 hole panel, 4 hole panel, bulkhead or standard mount connectors; Body Can be right angle or straight connectors; Cable Can use corrugated, flexible, formable or semirigid cable.
N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.
BNC Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be 4 hole flange, bulkhead, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder, field replaceable, solder or solder/solder; Body is brass with nickel or gold or silver or tri-metal plating.
Features： Wide Frequency Band for 4G and 5G, 698-2700MHz, 617-3800MHz, 698-3800MHz; Low Insertion Loss & Low VSWR; Low PIM, supports -140/-150/-155/-160dBc; N, 7/16 DIN, 4.3-10 Female connectors are available; Use for equal splitting of high power RF signals with minimal reflections or loss; Multi-type power splitters are available in 2-way, 3-way and 4-way; High Reliability, IP65 & IP67 waterproof.
F Type adapters Features： Allow to interface F connectors with BNC, F, N, RCA, SMA or UHF connectors; Has female to female, female to jack, female to male, female to plug, male to female, male to jack, male to male or male to plug gender combinations; Has bulkhead or mountless configurations; Has standard or Push-On interfaces; Has straight or right angle versions; Standard or high performance designs.
7-16 DIN features： Can terminate to coax or terminal; Can be male or female gender in standard polarity, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder, field replaceable or solder.
Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.
N Type Attenuator Features： N connector input, out connector can be 7-16 DIN, N, SMA or TNC; Maximum frequency of 18 GHz; A male gender in and a female gender out; Attenuation values range from 1dB to 60dB.
Features： Screw-type and a push-pull locking mechanism are available; Maximum passive intermodulation (IM3) of -165 dBc; Low VSWR; Applies silver-plating on all inner and outer conductor parts; Suited for transmitting medium or high power indoors and outdoors.
N type features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, clamp/solder (captive contact), crimp/solder, field replaceable, solder or solder/solder; Body is brass or stainless steel.
Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.
2.92mm adapters Features： Includes bulkhead, 4 hole panel or mountless configurations; Allow to interface 3.5mm connectors with 1.85mm, 2.4mm, 2.92mm, 3.5mm, SMP or N connectors; Available in female to female, female to male, female to sexless, male to female, male to male or male to sexless gender combinations; OEM & ODM available for special design with competitive Factory price; 40GHz 3.5mm adapter maximum frequency is provided; Can be Customized for unique material or performance requirement.
1.0-2.3 Connector Features： Can terminate to coax or PCB (printed circuit board); Can be jack or plug gender in standard polarity with 50 or 75 ohm impedance; Body can be straight or right angle; Mount Method can be bulkhead or mount-less; Attachment methods include crimp/solder, solder or solder/solder; Body is brass or stainless steel.
