Features: Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.
N type adapters Features: Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7-16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.
7-16 DIN Attenuator Features: 7-16 DIN connector input, out connector can be N or 7-16 DIN; Maximum frequency of 18GHz; A female gender in and a female or male gender out; Attenuation values range from 1dB to 60dB.
BNC Cable assembly Features: Can be combined with 1.0-2.3, 7-16 DIN, BMA, BNC, F, FAKRA, MCX, N, SMA, SMB, Straight Cut Lead, TNC, or UHF connector; Body Can be bulkhead or standard mount connectors; Body Can be right angle or straight connectors; Cable Can use flexible, formable or semirigid cable.
UHF Connector Features: Can terminate to coax or terminal; Can be male, female or sexless gender with 50ohm impedance; Body can be straight or right angle; Mount Method can be 4 hole flange, bulkhead, 4 hole panel or mountless options; Attachment methods include clamp/solder, crimp/solder, field replaceable or solder; Body is brass or zinc.
4.3-10 Cable assembly Features: Can be combined with 2.2-5, 4.3-10, 7-16 DIN, N, NEX10, QMA, or SMA connector; Body Can be right angle or straight connectors; Body Can be 4 hole panel, bulkhead or standard mount connectors; Cable Can use flexible or corrugated cable.
BNC Connector Features: Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be 4 hole flange, bulkhead, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder, field replaceable, solder or solder/solder; Body is brass with nickel or gold or silver or tri-metal plating.
4.3-10 adapters Features: Allow to interface 4.3-10 connectors with N, 7-16 DIN, 4.3-10 or SMA connectors; Same design as 7-16 connectors , smaller up to 40% lighter; Designs IP67, and provide excellent VSWR performance up to 6GHz; Very stable PIM performance, allowing for easier installation; Silver plated contacts and White Bronze plated bodies offer a high-degree of conductivity, corrosion resistance, and durability; Applications low passive intermodulation or PIM.
TNC adapters Features: Allow to interface UHF connectors with BNC, F, N, SMA, TNC or UHF connectors; Has female to female, female to male, male to female, male to male or male to plug gender combinations; Has straight or right angle sharp; Has bulkhead or mountless configurations; Threaded coupling; Ease of assembly; Use in low frequency systems from 0.6 - 300 MHz.
Features: Wide Frequency Band for 4G and 5G, 698-2700MHz, 617-3800MHz, 698-3800MHz; Low Insertion Loss & Low VSWR; Low PIM, supports -140/-150/-155/-160dBc; N, 7/16 DIN, 4.3-10 Female connectors are available; Use for equal splitting of high power RF signals with minimal reflections or loss; Multi-type power splitters are available in 2-way, 3-way and 4-way; High Reliability, IP65 & IP67 waterproof.
TNC adapters Features: Allow to interface TNC connectors with 7-16 DIN, BNC, MCX, N, SMA, TNC or UHF connectors; Has female to female, female to jack, female to male, female to plug, female to sexless, male to female, male to jack, male to male, male to plug or male to sexless gender varieties; Has standard polarity or reverse polarity options; Has bulkhead, 4 hole panel or mountless configurations; Has quick disconnect (QD) or standard interfaces; A miniature, threaded weatherproof; With a constant 50ohm impedance and a frequency range of DC to 11GHz; TNC contact design same as BNC, higher frequency performance than the BNC.
BNC adapters Features: Allow to interface BNC connectors with BNC, F, MCX, MMCX, N, RCA, SMA, SMB, TNC or UHF connectors; Has female to female, female to jack, female to male, female to plug, female to sexless, male to female, male to jack, male to male, male to plug or male to sexless gender combinations; Has straight or right angle versions; Has bulkhead, 4 hole panel or mountless configurations; Has 50ohm or 75ohm impedance; BNC adaptors are miniature, lightweight and reliable; Has standard or high performance designs.
U.FL Cable assembly Features: Can be combined with MCX, MMCX, N, SMA, TNC or U.FL connector; Frequency Up to 6GHz; Cable use ultra-fine coaxial cable 0.81mm, 1.13mm, 1.37mm, RG178; Body is gold plated.
N type features: Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, clamp/solder (captive contact), crimp/solder, field replaceable, solder or solder/solder; Body is brass or stainless steel.
SMP Cable assembly Features: Can be combined with SMP, SMA, MMCX, N, SSMC, 2.92mm or TNC connector; Cable use flexible, formable or semirigid cable; Frequency Up to 40GHz; Body Can be right angle or straight connectors.