SMA adapters Features： Allow to interface SMA connectors with 1.0-2.3, 1.85mm, 2.4mm, 3.5mm, 7-16 DIN, BNC, F, MCX, MMCX, N, QMA, SMA, SMB, SMC, SMP, TNC, UHF or U.FL connectors; Has female to female, female to jack, female to male, female to plug, female to receptacle, female to sexless, male to female, male to jack, male to male, male to plug, male to receptacle or male to sexless gender designs; Has standard polarity or reverse polarity SMA (RP-SMA) options; Has bulkhead, 4 hole panel or mountless configurations; Has quick disconnect (QD) or standard interfaces.
TNC adapters Features： Allow to interface UHF connectors with BNC, F, N, SMA, TNC or UHF connectors; Has female to female, female to male, male to female, male to male or male to plug gender combinations; Has straight or right angle sharp; Has bulkhead or mountless configurations; Threaded coupling; Ease of assembly; Use in low frequency systems from 0.6 - 300 MHz.
QMA adapters Features： Allow to interface QMA connectors with QMA, N or SMA connectors; Has female to male or male to female gender varieties; Quick disconnect version of the SMA adaptor and shares the same internal construction; Excellent performance up to 18GHz; Because of the innovative coupling mechanism, a 360-degree butt joint is maintained resulting in low RF leakage; QMA series offers a more convenient installation than SMA; The interface mates with a snap-on instead of a threaded coupling, has a significant time advantage.
SMA Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.
SMA Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.
SMA Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.
SMA Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.
SMA Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.
