QMA/EIA Connectors

EIA Connector 1-5/8 EIA Flange Connector For 7/8 Cable

Features:

  • Suitable for all the main manufacturers of the RF market;
  • Low losses, high performance and great robustness;
  • Easy mount installation with conventional tools;
  • Protection IP66 to IP68.
  • Brand:

    ROHO
  • Product Origin:

    China
  • Shipping Port:

    Shenzhen
  • Lead Time:

    7-17days

EIA Connector 1-5/8 EIA Flange Connector For 7/8 Cable

 

The EIA coaxial connectors are available in EIA 7/8”, EIA 1 5/8”, EIA 3 1/8”, EIA 4 1/2” and EIA 6 1/8” versions, all of which are suitable for RF applications. Designed to support cables with foam or air-dielectric, they consist of a main body, mounting flange with various bolt circles, and typically have interchangeable/removable center conductor “bullets”. Due to the flexibility of their design, EIA connectors are often not identified as male or female, as the connector can typically be configured as either. EIA connectors can be found in high power applications on directional couplers, coaxial cables, power amplifier outputs, and interconnects on communication towers and antennas. The most common sizes found in general test and measurement applications are the 1 5/8 and 7/8 EIA. There are a variety of adapters available to adapt the EIA series to some of the larger RF connectors such as the 7-16 and N type.

 

Specifications

ELECTRICAL DATA  
Frequency Range       DC-5GHz
VSWR    ≤1.07@DC-1000MHz
Insertion loss typical ≤0.05DBi
Dielectric Withstanding Voltage ≥6000V RMS,50Hz,at sea level
Dielectric Resistance  ≥5000MΩ
Average Power 2.3KW @900MHz
Peak Power Maximum 90KW
Contact Resistance  Center Contact ≤1.5mΩ       Outer Contact ≤1.5 mΩ
MECHANICAL DATA  
Durability Mating cycles ≥500
ENVIRONMENTAL DATA  
Operating Temperature -45 °C-85 °C
Weatherproof Rate IP68
RoHs (2002/95/EC) Compliant
Suitable Cable Family Andrew Cable P/N :LDF5-50A and RFS Cable P/N:LCF78-50A
MATERIAL DATA  
Body Brass
Insulator PTFE
Inner Conductor Phosphor Bronze 
Coupling Nut Brass
Gasket Silicone Rubber
Cable Clamp Brass
Hardware kit(Bolts /Nut/Washer) Stainless Steel 

 

Applications

  • Mobile communication
  • Broadcast
  • Measurement
  • Satellite communication

 

Leave A Message
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!
Categories
Related Products
QMA Right Angle RF Connector
50ohm QMA RF Connector Plug Right Angle Crimp for LMR195/RG58/RG142/RG400 Cable
Features: High power handling capability; Rotatable 360° after connection for flexibility with installation; Snap-on interface for quick and easy installation.
QMA Female RF Coaxial Connector
RF Coaxial Hexagonal Female QMA Connector for Cable
Features: High power handling capability; Snap-on interface for quick and easy installation; Rotatable 360° after connection for flexibility with installation.
RP TNC Male RF Coaxial Connector
RP TNC Male Straight Connector Crimp Solder Attachment for RG213 RG8 Cable
TNC Connector Features: Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder, solder or solder/solder; Body is brass or stainless steel.
MCX Female RF Coaxial Connector
Straight Gold Plated Female MCX RF Coaxial Connector for RG316/58/11/6 Cable
Features: Broadband performance with low reflection DC to 6 GHz; Quick connect/disconnect snap-on mating reduces installation time; Accommodates a wide range of miniature RG flexible coaxial cables, including semi-rigid cable providing customers flexibility in their design and manufacturing; Available for 50 or 75 ohm application.
433MHZ SMA Male Radio Antenna
SMA Male Radio Antenna, Suction Antenna 433Mhz RP SMA Plug Male Straight SMA Raido Antenna with Magnetic Base for Ham Radio
Features: Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.
4.3-10 Male RF Coaxial Connector
4.3-10 Male Right Angle Connector Clamp Contact Attachment for 1/2" Superflexible Cable
4.3-10 features: Can terminate to coax or terminal; Can be male or female gender in standard polarity, with 50ohm impedance; Body can be straight or right angle; Mount Method can be bulkhead, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder, field replaceable or solder.
RP TNC Male RF Coaxial Connector
RP TNC Male Right Angle Connector Crimp Solder Attachment for RG55 RG141 RG142 RG223 RG400 Cable
TNC Connector Features: Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder, solder or solder/solder; Body is brass or stainless steel.
RP TNC Male RF Coaxial Connector
RP TNC Male Right Angle Connector Crimp Solder Attachment for LMR400 Cable
TNC Connector Features: Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder, solder or solder/solder; Body is brass or stainless steel.
Any question? Contact us now !

Leave A Message

Leave A Message
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!

Home

Products

skype

whatsapp