NEX10 Adaptors Features： Screw-type and a push-pull locking mechanism are available; Maximum passive intermodulation (IM3) of -165 dBc; Low VSWR; Applies silver-plating on all inner and outer conductor parts; Suited for transmitting medium or high power indoors and outdoors.
N type features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, clamp/solder (captive contact), crimp/solder, field replaceable, solder or solder/solder; Body is brass or stainless steel.
SMA Adapters Features： Allow to interface SMA connectors with 1.0/2.3, 1.85mm, 2.4mm, 3.5mm, 7/16 DIN, BNC, F, MCX, MMCX, N, QMA, SMA, SMB, SMC, SMP, TNC, UHF or U.FL connectors; Has female to female, female to jack, female to male, female to plug, female to receptacle, female to sexless, male to female, male to jack, male to male, male to plug, male to receptacle or male to sexless gender designs; Has standard polarity or reverse polarity SMA (RP-SMA) options; Has bulkhead, 4 hole panel or mountless configurations; Has quick disconnect (QD) or standard interfaces.
Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.
Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.
BNC Cable assembly Features： Can be combined with 1.0-2.3, 7-16 DIN, BMA, BNC, F, FAKRA, MCX, N, SMA, SMB, Straight Cut Lead, TNC, or UHF connector; Body Can be bulkhead or standard mount connectors; Body Can be right angle or straight connectors; Cable Can use flexible, formable or semirigid cable.
1.0/2.3 Connector Features： Can terminate to coax or PCB (printed circuit board); Can be jack or plug gender in standard polarity with 50 or 75 ohm impedance; Body can be straight or right angle; Mount Method can be bulkhead or mount-less; Attachment methods include crimp/solder, solder or solder/solder; Body is brass or stainless steel.
UHF Connector Features： Can terminate to coax or terminal; Can be male, female or sexless gender with 50ohm impedance; Body can be straight or right angle; Mount Method can be 4 hole flange, bulkhead, 4 hole panel or mountless options; Attachment methods include clamp/solder, crimp/solder, field replaceable or solder; Body is brass or zinc.
