1.0/2.3 Connector Features： Can terminate to coax or PCB (printed circuit board); Can be jack or plug gender in standard polarity with 50 or 75 ohm impedance; Body can be straight or right angle; Mount Method can be bulkhead or mount-less; Attachment methods include crimp/solder, solder or solder/solder; Body is brass or stainless steel.
UHF Connector Features： Can terminate to coax or terminal; Can be male, female or sexless gender with 50ohm impedance; Body can be straight or right angle; Mount Method can be 4 hole flange, bulkhead, 4 hole panel or mountless options; Attachment methods include clamp/solder, crimp/solder, field replaceable or solder; Body is brass or zinc.
TNC Cable assembly Features： Can be combined with BNC, FAKRA, MCX, MMCX, N, SMA, SMB or TNC connector; Body Can be right angle or straight connectors; Max Frequency 18 GHz; Cable Can use flexible, formable or semirigid cable.
4.3-10 adapters Features： Allow to interface 4.3-10 connectors with N, 7/16 DIN, 4.3-10 or SMA connectors; Same design as 7/16 connectors , smaller up to 40% lighter; Designs IP67, and provide excellent VSWR performance up to 6GHz; Very stable PIM performance, allowing for easier installation; Silver plated contacts and White Bronze plated bodies offer a high-degree of conductivity, corrosion resistance, and durability; Applications low passive intermodulation or PIM.
TNC adapters Features： Allow to interface UHF connectors with BNC, F, N, SMA, TNC or UHF connectors; Has female to female, female to male, male to female, male to male or male to plug gender combinations; Has straight or right angle sharp; Has bulkhead or mountless configurations; Threaded coupling; Ease of assembly; Use in low frequency systems from 0.6 - 300 MHz.
N type features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, clamp/solder (captive contact), crimp/solder, field replaceable, solder or solder/solder; Body is brass or stainless steel.
SMA Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.
F Type Cable assembly Features： Can be combined with BNC, SMB, F or N connector; Body Can be bulkhead or standard mount connectors; Body Can be right angle or straight connectors; Cable Can use flexible cable.
