7-16 DIN adapters Features： Allow to interface 7-16 DIN connectors with 7-16 DIN, 4.3-10, N, SMA or TNC connectors; Very robust, extremely stable and waterproof; Has straight or right angle versions; Offers standard, low PIM or high performance options.
7-16 DIN features： Can terminate to coax or terminal; Can be male or female gender in standard polarity, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder, field replaceable or solder.
N type features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, clamp/solder (captive contact), crimp/solder, field replaceable, solder or solder/solder; Body is brass or stainless steel.
SMA adapters Features： Allow to interface SMA connectors with 1.0-2.3, 1.85mm, 2.4mm, 3.5mm, 7-16 DIN, BNC, F, MCX, MMCX, N, QMA, SMA, SMB, SMC, SMP, TNC, UHF or U.FL connectors; Has female to female, female to jack, female to male, female to plug, female to receptacle, female to sexless, male to female, male to jack, male to male, male to plug, male to receptacle or male to sexless gender designs; Has standard polarity or reverse polarity SMA (RP-SMA) options; Has bulkhead, 4 hole panel or mountless configurations; Has quick disconnect (QD) or standard interfaces.
N type adapters Features： Allow to interface N connectors with N, 7-16 DIN, 4.3-10, 3.5mm, or 2.2-5 connectors; Require low PIM in order to avoid interference in network quality during high speed data transmission; Flexibility in installation with the ability to blind mate； Lightweight and can accommodate various cable types; Both indoor and outdoor applications.
UHF Connector Features： Can terminate to coax or terminal; Can be male, female or sexless gender with 50ohm impedance; Body can be straight or right angle; Mount Method can be 4 hole flange, bulkhead, 4 hole panel or mountless options; Attachment methods include clamp/solder, crimp/solder, field replaceable or solder; Body is brass or zinc.
TNC adapters Features： Allow to interface UHF connectors with BNC, F, N, SMA, TNC or UHF connectors; Has female to female, female to male, male to female, male to male or male to plug gender combinations; Has straight or right angle sharp; Has bulkhead or mountless configurations; Threaded coupling; Ease of assembly; Use in low frequency systems from 0.6 - 300 MHz.
TNC adapters Features： Allow to interface TNC connectors with 7-16 DIN, BNC, MCX, N, SMA, TNC or UHF connectors; Has female to female, female to jack, female to male, female to plug, female to sexless, male to female, male to jack, male to male, male to plug or male to sexless gender varieties; Has standard polarity or reverse polarity options; Has bulkhead, 4 hole panel or mountless configurations; Has quick disconnect (QD) or standard interfaces; A miniature, threaded weatherproof; With a constant 50ohm impedance and a frequency range of DC to 11GHz; TNC contact design same as BNC, higher frequency performance than the BNC.
