TNC adapters Features: Allow to interface UHF connectors with BNC, F, N, SMA, TNC or UHF connectors; Has female to female, female to male, male to female, male to male or male to plug gender combinations; Has straight or right angle sharp; Has bulkhead or mountless configurations; Threaded coupling; Ease of assembly; Use in low frequency systems from 0.6 - 300 MHz.
N type features: Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, clamp/solder (captive contact), crimp/solder, field replaceable, solder or solder/solder; Body is brass or stainless steel.
2.92mm Connector features: Can terminate to coax, PCB (printed circuit board), field replaceable contact or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel, threaded or mount-less; Attachment methods include clamp/solder, field replaceable or solder; Body is brass or stainless steel.
4.3-10 features: Can terminate to coax or terminal; Can be male or female gender in standard polarity, with 50ohm impedance; Body can be straight or right angle; Mount Method can be bulkhead, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder, field replaceable or solder.
2.2-5 features: Can terminate to coaxial; Can be male or female gender in standard polarity, with 50ohm impedance; Body can be straight or right angle; Mount Method can be bulkhead or mount-less; Attachment methods include clamp/solder or solder/solder.
7-16 DIN features: Can terminate to coax or terminal; Can be male or female gender in standard polarity, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder, field replaceable or solder.
Features: Nominal mated height of 1.9 or 2.4mm (Max. 2.0 or 2.5mm ) ; Accepts high frequency transmission; Small mounting area The receptacle occupies an area of 7.7mm; Light weight; Plugs are terminated with ultra-fine coaxial (fluorinated resin insulated )cable; Automatic board placement; Simple connector mating / unmating; Verification of the fully mated condition.
BNC adapters Features: Allow to interface BNC connectors with BNC, F, MCX, MMCX, N, RCA, SMA, SMB, TNC or UHF connectors; Has female to female, female to jack, female to male, female to plug, female to sexless, male to female, male to jack, male to male, male to plug or male to sexless gender combinations; Has straight or right angle versions; Has bulkhead, 4 hole panel or mountless configurations; Has 50ohm or 75ohm impedance; BNC adaptors are miniature, lightweight and reliable; Has standard or high performance designs.