In the 5G base station architecture of the coaxial connector, the passive antenna will be combined with the RRU to form a new unit-AAU. The AAU will contain some physical layer functions; and the BBU will be split into CU and DU. Referring to the design of the current 5G experimental network AAU equipment, it is estimated that each AAU will contain two boards:...
In the 2008 financial crisis, China's manufacturing industry was sung "the transformation of mechanical automation development". In the past 10 years, this has already become the consensus of many companies, and it is a matter that many people must implement. Nowadays, the world is advancing automation technology, and the future development speed will obviously be fast. The Chinese m...
SYV75-3, 5, 7, 9 ..., 75 ohm, polyethylene insulated solid coaxial cable. In recent years, some people call it "video cable", SYWV75-3, 5, 7, 9 ... 75 ohm, physical foamed polyethylene insulated coaxial cable. Some people call it "RF cable", It can be connected to RF connectors. The basic performance of coaxial cable: (1) SYV physical structure is 100% pol...
With the rapid development of wireless communication technology, the application of Board-to-Board RF Connectors in the wireless system module Internet is becoming more and more popular, such as communication base stations, RRHs, repeaters, GPS devices and other similar applications. After several generations of evolution, Board-to-Board RF connectors are moving from l...
N-type connector is a threaded medium power connector with high reliability, strong shock resistance, excellent mechanical and electrical performance, widely used in radio equipment and instruments and ground launch systems under harsh vibration and environmental conditions. Connect the RF coaxial cable. Can be interchanged with international N-type products. According to the charact...
The RF coaxial connector is a functional component that relies on electrical signals or mechanical forces to connect, disconnect, or switch circuits. It transmits data electrical signals or electron energy. Thus, RF connectors can be found in locations where electronic systems exist. In large and medium-sized electronic systems, hundreds of RF coaxial connectors are required. It...
In addition to the evolution of the RF coaxial connector itself, the evolution of new mobile network in the RF system of all communication systems has also changed. Overview the future development of mobile communication protocols, channel bandwidth continues to increase, 200KHz in the 2G era, 5MHz in the 3G era, 100MHz in the 4G era, will reach 1GHz in t...
The N-type connector is suitable for frequency range from 0 to 11 GHz. Which it is used for medium and small power coaxial cable connectors with threaded connection. It is the most widely used connector in indoor distribution and has good mechanical properties. Most feeders are used. The N-type connector is a small and medium power connector with a t...
