What are the main parts of the RF connector? Where is the application? Now introduce the relevant structural knowledge about RF connectors. The main components of the RF coaxial connector are outer conductor, insulator, center pin, nut case, buckle, waterproof ring, dust cap, etc. First, the outer conductor acts as a grounding shield. The materi...
With the rapid growth of consumer electronics, automotive electronics, communication terminal market and the continuous transfer of SMP Connector production to Asia especially China, Asia has become the most promising place in the SMP connector market, and China will become the global growth of SMP RF connector. Fast and large capacity markets. It is estimated that the growth rate of...
A typical VSWR for a low-cost 3 GHz test cable and when used at higher frequencies requires a microwave test RF cable assembly, which means that the user has to pay a higher cost. This is because the design and manufacturing philosophy of microwave cables is different from that of conventional cables. For example, microwave cables usually use multiple layers of sh...
The MMCX interface is a type of coaxial connector. It was developed in 1990 and uses a plug-in connection to rotate 360 degrees. Usually its characteristic impedance is 50 ohms. The MMCX connector is commonly found on the antenna interface of a PC's wireless PC card, and on the GPS communication antenna jacks of some PDAs and GPS navigation devices. On some of the in-ear he...
In a variety of RF coaxial connectors are chosen to have different coatings, why should it be plated? What factors should be considered for plating? What is the plating material? This pile of questions, is not very Mongolian! Today summarized the materials and problems of the RF coaxial connector selection coating. Let's take a look! In the electrical and electronic ind...
Due to the increasing variety of RF coaxial connectors, new structures and applications are emerging, and attempts to solve classification and naming problems with a fixed pattern have become difficult to adapt. The following is a list of some RF coaxial connectors sorted out . 1, according to the nature of use External connector (for external chassis...
Semi-rigid cable assemblies have excellent passive intermodulation performance when equipped with suitable connectors, making them ideal for modern multi-frequency wireless communication systems including distributed antenna system related equipment. The following summarize the results and the engineers explored. Electrical stability: Since the semi-...
Many people mentioned the requirements for components (including electrical performance, flexibility, and use environment). The generalization is too idealistic. Because many requirements are actually contradictory to each other, it seems that the fish and the bear's paw can't have the same: for example, if you want the cable assembly to have a small difference and you want the cable...
