SMP Female to SMP Female Connector with RG402 Cable Assembly

Features： High Peak Power; Low VSWR; Multiple IP Degree Conditions; Powers 2W to 500W; Low PIM Performance; N,DIN, 4.3-10 Connectors; Low Cost Design, Design to Cost.

BNC Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be 4 hole flange, bulkhead, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder, field replaceable, solder or solder/solder; Body is brass with nickel or gold or silver or tri-metal plating.

TNC adapters Features： Allow to interface TNC connectors with 7-16 DIN, BNC, MCX, N, SMA, TNC or UHF connectors; Has female to female, female to jack, female to male, female to plug, female to sexless, male to female, male to jack, male to male, male to plug or male to sexless gender varieties; Has standard polarity or reverse polarity options; Has bulkhead, 4 hole panel or mountless configurations; Has quick disconnect (QD) or standard interfaces; A miniature, threaded weatherproof; With a constant 50ohm impedance and a frequency range of DC to 11GHz; TNC contact design same as BNC, higher frequency performance than the BNC.

Featrues: Wide Frequency Band Covering 555-4000MHz; Excellent Performance in PIM; Low VSWR; Indoor& Outdoor Using IP65; Available with Type N, DIN7-16, 4.3-10, NEX10 Connectors.

Features： Radiation Pattern of Antenna; Polarization of Antenna; Intensity of Radiation; Effective Aperture; Gain & Directivity; Bandwidth; Power Gain & Radiation Efficiency; Effective Length; Input Impedance.

SMB Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be jack or plug gender with 50 Ohm impedance; Body can be straight or right angle; Mount Method can be bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder or solder; Body is brass.

TNC Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder, solder or solder/solder; Body is brass or stainless steel.

7-16 DIN features： Can terminate to coax or terminal; Can be male or female gender in standard polarity, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder, field replaceable or solder.