75ohm DIN 1.0-2.3 Right Angle Male Plug to BNC Male HD SDI Connector with RG179 Cable

1.0-2.3 Cable assembly Features： Can be combined with 1.0-2.3, or BNC connector; Broadband performance with low reflection; Quick connect/disconnect snap-on mating reduces installation time; Body is straight with male genders.

1.0-2.3 Cable assembly Features： Can be combined with 1.0-2.3, or BNC connector; Broadband performance with low reflection; Quick connect/disconnect snap-on mating reduces installation time; Body is straight with male genders.

SMP adapters Features： Allow to interface SMP connectors with SMA, 2.4mm, 2.92mm, MMCX, TNC or SMP connectors; Has female to female, female to male, male to female or male to male gender combinations; Subminiature interface in the same scale as MMCX connectors; Frequency range of DC to 40 GHz; Miniaturized high frequency coaxial modules, offered in both push-on and snap-on mating styles; Cable-to-board mated pair, the plug side can be provided in either right angle or straight with termination capability to either 0.047” or 0.086”, semi-rigid or conformable coax; Receptacles for surface, through hole, or end launch mounting.

2.2-5 adapters Features： Allow to interface N connectors with N, 7/16 DIN, 4.3-10, 3.5mm, or 2.2-5 connectors; Require low PIM in order to avoid interference in network quality during high speed data transmission; Flexibility in installation with the ability to blind mate； Lightweight and can accommodate various cable types; Both indoor and outdoor applications.  

Fakra features： Can terminate to coax or PCB (printed circuit board); Can be jack or plug gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be crimp/solder or solder; Attachment methods include crimp/solder or solder; Body is plastic.

N type features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, clamp/solder (captive contact), crimp/solder, field replaceable, solder or solder/solder; Body is brass or stainless steel.

N type adapters Features： Allow to interface N connectors with N, QMA, QN, SMA, 1.85mm, 2.4mm, 2.92mm, 3.5mm, 7/16 DIN, 4.3-10, BNC, MCX, UHF, SMB, TNC or UHF connectors; Satisfy for a durable, weatherproof, medium-size RF adapter with consistent performance; High frequency range up to 8GHz; Threaded coupling mechanism, used in all systems where excellent RF and mechanical performance.

SMA Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity (RPSMA / RP-SMA) or reverse polarity threads, with 50ohm impedance; Body can be straight, radius right angle or right angle; Mount Method can be press in, bulkhead, 2 hole panel, 4 hole panel or mount-less; Attachment methods include clamp/solder, compression, crimp/solder, crimp/solder (captive contact), field replaceable, solder, solder (without contact), solder/solder or solder/solder (captive contact); Body is brass or stainless steel.