The RF coaxial connector is a functional component that relies on electrical signals or mechanical forces to connect, disconnect, or switch circuits. It transmits data electrical signals or electron energy. Thus, RF connectors can be found in locations where electronic systems exist. In large and medium-sized electronic systems, hundreds of RF coaxial connectors are required. It...
In addition to the evolution of the RF coaxial connector itself, the evolution of new mobile network in the RF system of all communication systems has also changed. Overview the future development of mobile communication protocols, channel bandwidth continues to increase, 200KHz in the 2G era, 5MHz in the 3G era, 100MHz in the 4G era, will reach 1GHz in t...
SMA connectors are a widely used half-precision ultra-small RF and microwave connector, especially for RF connections in electronic systems with frequencies up to 18 GHz or higher. At present, more and more scenes need SMA connectors, which made by the body, the center pin, an insulator with a waterproof outer. So any other will use SMA connector? ...
The high frequency connector is a precision connector for testing and measurement, with high sensitivity, low loss, and phase stability for high frequency microwave applications at 67 GHz. They are made of high-grade materials for longer life and greater durability. Due to its high mechanical stability and thread design, the high frequency connector provides the best electrical ...
The N-type connector is suitable for frequency range from 0 to 11 GHz. Which it is used for medium and small power coaxial cable connectors with threaded connection. It is the most widely used connector in indoor distribution and has good mechanical properties. Most feeders are used. The N-type connector is a small and medium power connector with a t...
With the rapid advancement of science, the threaded waterproof connectors SMA, which are the most widely used and are also widely used in outdoor. SMA waterproof connectors mean that connector can be used when there is water. A connector that can withstand the mechanical properties of the connector and the electrical performance of the con...
RF coaxial connectors are commonly referred to as RF connectors. For RF connections, it is possible to use coaxial connectors. These RF coaxial connectors are required when the signal reaches frequencies above several million Hertz. Since the transmission line must be used to transfer RF energy from one place to another, they need to be used. The most convenient an...
RF connector is a connector for electrical connection for signal transmission in radio frequency applications. These connectors are used in a variety of applications from 0 to 18 GHz . All types of RF connectors have a male connector and a female connector. Male connectors are commonly referred to as plugs and female connectors are referred to as jacks. The center pin and the externa...
