China SMA RF Coaxial Connector Factory,Wholesale SMA RF Coaxial Connector

About cable component loss values Aug 29, 2022
A typical VSWR for a low-cost 3 GHz test cable and when used at higher frequencies requires a microwave test RF cable assembly, which means that the user has to pay a higher cost. This is because the design and manufacturing philosophy of microwave cables is different from that of conventional cables. For example, microwave cables usually use multiple layers of sh...
- RF cable assembly
- cable assembly
- coaxial cable assemblies
RF connector universal main code and description Sep 04, 2022
An RF connector, also known as an RF connector, is generally considered to be an element attached to a cable or mounted on an instrument as an electrical connection or separate component of the transmission line. The RF connector is a mechatronic product that serves primarily as a bridge. The following is a description of the RF connector code . N connectors: Threaded R...
- N connectors
- BNC connectors
- TNC connectors
MMCX interface features Sep 13, 2022
The MMCX interface is a type of coaxial connector. It was developed in 1990 and uses a plug-in connection to rotate 360 degrees. Usually its characteristic impedance is 50 ohms. The MMCX connector is commonly found on the antenna interface of a PC's wireless PC card, and on the GPS communication antenna jacks of some PDAs and GPS navigation devices. On some of the in-ear he...
- MMCX connector
- MMCX coaxial connector
- MCX connector
About the model characteristics of the RF connector Sep 19, 2022
Here are well-known SMA connectors in the RF connector, BNC connectors, which are far more than these connectors in the RF connector. There are basic components of the RF connector, including the outer conductor, the insulator, the center pin, and the nut housing, buckle, waterproof ring, dust cap, etc. The following takes you through the structure and classification of the RF c...
- SMA connectors
- BNC connectors
- QN connectors
Why is the RF coaxial connector to be coated, and what material is used? Sep 25, 2022
In a variety of RF coaxial connectors are chosen to have different coatings, why should it be plated? What factors should be considered for plating? What is the plating material? This pile of questions, is not very Mongolian! Today summarized the materials and problems of the RF coaxial connector selection coating. Let's take a look! In the electrical and electronic ind...
- RF coaxial connectors
- coaxial connector
- electrical connector
Classification of RF coaxial connectors Oct 09, 2022
Due to the increasing variety of RF coaxial connectors, new structures and applications are emerging, and attempts to solve classification and naming problems with a fixed pattern have become difficult to adapt. The following is a list of some RF coaxial connectors sorted out . 1, according to the nature of use External connector (for external chassis...
- RF coaxial connectors
- PCB connectors
- RF connector
5 points about RF connector signal interference solution Oct 17, 2022
When the RF connector has a signal interference problem or cannot pass the test. The following five points of solution are summarized for your reference. 1) Although the chassis or cabinet is well shielded, the radiated emissions are too high or cannot pass the radiated immunity test. This is because the outer tow cable on the chassis or cabinet acts as an RF antenna. O...
- RF connector
- RF antenna
- cable assembly
Semi-rigid cable assembly electrical stability and low passive intermodulation Oct 24, 2022
Semi-rigid cable assemblies have excellent passive intermodulation performance when equipped with suitable connectors, making them ideal for modern multi-frequency wireless communication systems including distributed antenna system related equipment. The following summarize the results and the engineers explored. Electrical stability: Since the semi-...
- power splitters
- coaxial cable
- cable assemblies

1 2 3 4 5 6 ... 11

A total of 11 pages

Categories

Blog

New Blog

Tags