High Frequency 0.5W DC-18G/40G RF Coaxial Terminator 50ohm 2.92mm Male Termination Load

Features： High Reliable; Good Mechanical Performance; Wide Frequency Range from DC to 40GHz.  

Features： High Reliable; Good Mechanical Performance; Wide Frequency Range from DC to 40GHz.  

N Type Attenuator Features：  N connector input, out connector can be 7/16 DIN, N, SMA or TNC; Maximum frequency of 18 GHz; A male gender in and a female gender out; Attenuation values range from 1dB to 60dB.  

SMA Cable assembly Features： Can be combined with 1.85mm, 2.4mm, 2.92mm, 3.5mm, 4.3-10, 7-16 DIN, BNC, FAKRA, MCX, MMCX, N, NEX10, QMA, QN, SMA, SMB, SMP, TNC, Trimmed Lead or U.FL connectors; Body Can be 2 hole panel, 4 hole panel, bulkhead or standard mount connectors; Body Can be right angle or straight connectors; Cable Can use corrugated, flexible, formable or semirigid cable.

SMA Cable assembly Features： Can be combined with 1.85mm, 2.4mm, 2.92mm, 3.5mm, 4.3-10, 7-16 DIN, BNC, FAKRA, MCX, MMCX, N, NEX10, QMA, QN, SMA, SMB, SMP, TNC, Trimmed Lead or U.FL connectors; Body Can be 2 hole panel, 4 hole panel, bulkhead or standard mount connectors; Body Can be right angle or straight connectors; Cable Can use corrugated, flexible, formable or semirigid cable.

SMP adapters Features： Allow to interface SMP connectors with SMA, 2.4mm, 2.92mm, MMCX, TNC or SMP connectors; Has female to female, female to male, male to female or male to male gender combinations; Subminiature interface in the same scale as MMCX connectors; Frequency range of DC to 40 GHz; Miniaturized high frequency coaxial modules, offered in both push-on and snap-on mating styles; Cable-to-board mated pair, the plug side can be provided in either right angle or straight with termination capability to either 0.047” or 0.086”, semi-rigid or conformable coax; Receptacles for surface, through hole, or end launch mounting.

TNC adapters Features： Allow to interface TNC connectors with 7/16 DIN, BNC, MCX, N, SMA, TNC or UHF connectors; Has female to female, female to jack, female to male, female to plug, female to sexless, male to female, male to jack, male to male, male to plug or male to sexless gender varieties; Has standard polarity or reverse polarity options; Has bulkhead, 4 hole panel or mountless configurations; Has quick disconnect (QD) or standard interfaces; A miniature, threaded weatherproof; With a constant 50ohm impedance and a frequency range of DC to 11GHz; TNC contact design same as BNC, higher frequency performance than the BNC.

TNC Connector Features： Can terminate to coax, PCB (printed circuit board) or terminal; Can be male or female gender in standard polarity or reverse polarity threads, with 50ohm impedance; Body can be straight or right angle; Mount Method can be press in, bulkhead, 4 hole panel or mount-less; Attachment methods include clamp/solder, crimp/solder, solder or solder/solder; Body is brass or stainless steel.