China SMP RF Coaxial Connector Factory,Wholesale SMP RF Coaxial Connector

How to solder micro RF coaxial connector? Apr 18, 2022
The miniature RF coaxial connector has obvious advantages in many connectors, light weight, small size, easy to use, etc., but many customers do not know how to solder the miniature RF coaxial connector. If the welding is wrong, it will cause Poor contact, which will cause signal transmission, how to solder the connector? The following will tell you how to solder the ...
N type connector in wireless antenna feeder system Apr 24, 2022
It is especially important to select a suitable N type connector in the establishment of the radio antenna feeder system. How has selected medium and small power with threaded connection mechanism in the construction of the previous relay station antenna feeder system. Connector. In the past, we chose a medium and small power N type connector with a threaded conne...
What are the advantages and disadvantages of MMCX connectors? May 04, 2022
The is a coaxial RF connector that was developed in the 1990s and uses a snap-in connection to rotate 360 degrees. Usually its characteristic impedance is 50 ohms. The MMCX RF connectors is commonly found on the antenna interface on a PC's wireless PC card, and on the GPS communication antenna jacks of some PDAs and GPS navigation devices. On some of the in-ear headphones, the MMCX interface is al...
- MMCX RF connectors
- MMCX connectors
- flexible coaxial cables
Feeder connector cable assembly May 09, 2022
With the development of communication technology, people have higher and higher technical requirements for communication network. Communication products are becoming more and more diversified. ROHO customizes feeder connector cable components for diversified customers. Feeder connector cable assemblies are used in a wide range of applications, with an impedance of 50 oh...
- coaxial cable assembly
- cable assemblies
- connector cable assemblies
Demystifying the backend connection of the RF connector May 14, 2022
RF connector connection may be known to many people, such as snap-on, threaded, blind-plug, etc., but the connection method of the back-end may not be known. This is also a very important piece of knowledge of the RF connector. Will have a certain impact on the product. There are three types of backend connections for RF connectors: One is the connecting p...
- connection of the RF connector
- connect cables
- RF connector
SMP interface outer conductor function and design May 23, 2022
The RF connector is mainly composed of outer conductor, insulator, center pin, nut case, buckle ring, waterproof ring, dust cap and other parts, each of which has its own function! SMP RF connector is also a kind of RF connector, naturally no exception, here to give you a brief introduction to the knowledge of the outer conductor! The outer conductor of the smp interface is mainly a ground shield,...
- SMP RF connector
- SMP coaxial connector
- SMP RF coaxial connector
What is the RF connector PIM value? May 29, 2022
Regarding the main performance PIM value (passive intermodulation) in the RF connector, you may only know that there is this performance value, but what is the use of it, and what effect it will have on the performance of the RF connector. How much loss is there in the signal transmission of the device. The PIM value (Passive Intermodulation) is a distorted s...
- 4.3-10 connector
- Low PIM connector
- N Type connector
SMB RF connector transmit power Jun 07, 2022
The importance of the transmit power of the SMB RF connector is that the transmitter's signal needs to be spatially faded before it can reach the receiver, so the higher the transmit power means the farther the communication distance. So, do we want to pay attention to SNR? For example, if our transmit signal has a poor SNR, is the signal SNR arriving at the receiver also poor? ...
- SMB RF connector
- SMB connector